MVP-9000i-GB (FG5967-01)- AMX 9” Modero ViewPoint Touch Panel w/ Intercom BLACK

Description

The MVP-9000i redefines touch panel control offering both wireless and wired functionality, new user interface capabilities like gestures and page transitions, a stunning 9" widescreen 24-bit color display, full digital duplex telephone or intercom interface and built-in 802.11a/b/g Wi-Fi card with antenna diversity. The MVP-9000i switches seamlessly to wireless mode when removed from the PoE docking station. Transfer touch panel pages, upgrade the firmware or display photo files using the USB or mini-SD card slot. Available in white or black, the MVP-9000i also features a capacitive navigation pad, 4 programmable buttons, over 1 GB of useable flash memory and supports 5 hours of continuous use and three days of standby time.
Common Applications
Ideal for a wide variety of residential and commercial control and automation applications where flexibility of docked or mobile 802.11a/b/g functionality and extended battery life is desired. This is an ideal solution for extremely noisy wireless environments like MDUs and applications that require telephone/intercom functionality.
Features
Automatically switches between Ethernet connectivity when docked and Wi-Fi when out of dock
New user interface capabilities including gesturing and 7 different page transitions
International Fonts Support - The MVP-9000i provides support for right to left languages such as Arabic, a combination of language styles (right to left, and left to right) can also be used allowing inclusion of Arabic and English on the same screen
802.11a/b/g Wi-Fi with antenna diversity for improved wireless reliability and features enhanced wireless security protocol
Extended battery life - five hours of continuous use and three days of standby time
Micro-SD and USB stick support for easy file transfers and photo uploads
VoIP intercom and SIP telephone (requires AMX Gateway) ready
Cisco Compatible Extensions (CCX) Version 4 certified - CCX V4 certification means the MVP-9000i has been optimized to work with a Cisco wireless LAN infrastructure and that it meets the Wi-Fi alliance WPA/WPA2 specification addressing wireless network security, performance, reliability, diagnostic and network statistics gathering
Specifications
TOUCH SCREEN DISPLAY
Panel Type: TFT Color Active-Matrix
Active Screen Area (WH): 7 3/4" x 4 1/2" (19.7 cm x 11.8 cm), 9" (diagonal)
Resolution (WH): 800 x 480 pixels (HV) @ 60 Hz refresh rate
Aspect Ratio (WH): 16 x 9
Brightness: 400 cd/m2
Channel Transparency: 8-bit Alpha blending
Contrast Ratio: 900:1 max
Display Colors: 16.7M colors (24-bit color depth)
Dot/pixel pitch: 0.246 mm
Viewing Angle (Up/Down/Left/Right): 85/85/85/85
COMMUNICATIONS
Infrared Communication: IR Transmit only including AMX 38 KHz, AMX 455 KHz, and 3rd party IR
AUDIO
Mono Speaker: 4 ohm, 2 Watts 300 Hz cutoff frequency
GENERAL
Dimensions (HWD): 7 5/8" x 11" x 1 1/16" (19.4 cm x 27.9 cm x 2.7 cm)
Weight: 3.60 lbs (1.63 kg)
Power Requirements (Without Charging) Panel with battery fully charged or with no battery:
• Constant current draw: 1.1 A @ 12 VDC
• Startup current draw: 1.2 A @ 12 VDC
• Auto Dim current draw: 0.6 A @ 12 VDC
• Sleep current draw: 0.4 A @ 12 VDC
• Standby current draw: 0.07 A @ 12 VDC
• If panel is mounted onto a TDS or WDS, add 0.1 A to the above figures
Power Requirements (While Charging) Constant current draw: 2.0 A @ 12 VDC
• Auto Dim current draw: 0.5 A @ 12 VDC
• Sleep current draw: 0.3 A @ 12 VDC
• Standby current draw: NA
• If panel is mounted onto a TDS or WDS, add 0.1 A to the above figures
Minimum Power Supply Required:
• PS3.0 Power Supply (FG423-30)
• PS-POE-AT-TC High-Power PoE Injector, 802.3AT
Compliant (FG423-84) through the Table Docking Station and Wall Docking Station (included with docking stations)
Power Modes
• ON: All necessary modules are powered up and device remains online with the NetLinx Master
• ASLEEP: Only the backlight will be turned off after the user selectable time of inactivity has elapsed. Panel resumes the ON mode in ~ 1 second
• STANDBY: Power to all components other than the touch screen is turned off after the user selectable time of inactivity has elapsed. Device will turn back on by touching the screen
• SHUTDOWN: Power to all peripherals and components is turned off. The system remains in this mode until it is rebooted
Battery Duration: Five hours of continuous use, Three days standby time
Memory: 2GB internal microSD (1.1GB accessible to user)