VS820A1013 Nat. Honeywell VS820A Powerpile Pool Heater Furnace Gas Valve NEW!

Description

Note: Our valves are Brand New Current Date codes NOT 39 years old valves as sold by others on eBay
HONEYWELL
VS820A1013
COMBINATION GAS VALVE
Self Generating Powerpile Applications
Can be used on Furnaces, Boilers, Infra-red, Gas Burners, Pool Heaters
(Replaces VS820A1047
unless you need the side tap)
Gas Control Valve.
If you need the side tap this valve will not work for you!
1/2" x 3/4" Pipe Size
Natural Gas
Features
• Include pilot flow adjustment screw.
• Easy to install, adjust and service; all adjustments and connections are accessible from top of control.
• Add separate energy cutoff (ECO) where codes call for dual safety shutoff.
• Complete safety shutoff on pilot flame failure.
• LITE-RITE (OFF-PILOT-ON) lighting sequence.
• ECO connector for V800 models, Part No. 392451-1.
Product Specifications
Description
1/2 in. NPT x 3/4 in. NPT PowerPile Millivolt Combination Gas Valve with 3.5 in. wc adjustable pressure regulator setting
Application
Self-powered automatic control. Use with 750 mV pilot generator.
Type of Gas
Natural
Pressure Regulator
Standard
Electrical Ratings
750 mV
Mounting
0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically.
Body Pattern
Straight-through. multi-tapped with 1/2 in. right and left outlets plugged, except as noted.
Pressure Tapping
1/8 in. npt with plug.
Pilot Gas Outlet
Compression fitting for 1/4 in. OD tubing.
Inlet/Outlet Size (in.)
1/2 in. NPT x 3/4 in. NPT
Pressure Regulator Setting (psi)
3.5 in. wc Reg. Set/3-5" Adj. Range
Pressure Regulator Setting (kPa)
0.87 kPa
Pressure Ratings (psi)
1/2 psi
Pressure Ratings (kPa)
3.5 kPa
Electrical Connections
Terminal block has 3 combination screw and 1/4 in. quick connect terminals.
Temperature Range (F)
32 F to 175 F
Temperature Range (C)
0 C to 79 C
Dimensions (in.)
4 3/4 in. high x 4 1/16 in. wide x 3 3/16 in. deep
Please note some of the items require professional knowledge and skills to handle or installed. Thomas New Parts is not responsible for any damage or injuries resulted from mishandling of professional products. All HVACR equipment should be serviced/installed by certified professionals only. Please let us know if you have any concerns or questions.